I'm not preaching anyone to use AF-S mode for moving objects. You are free to do what ever you like
![Wink ;)](https://nikongear.net/revival/Smileys/default/wink.gif)
BTW: Again I'm not stating there is any tracking going on in AF-S!
I switch between the two modes all the time and really like them both and find that they both are working amazingly good.
I have almost no out of focus images for AF-S mode for moving subjects,,,
Yes if I half press and hesitate to fully press then I get an unsharp image if DOF is shallow, but that is misusing the AF-S mode,,, in that case I switch to AF-C or the AF-On
BTW I'm referring to F4, F5, D1, D1X, D2X, D3, D3X and D810 it has just gotten better and better
Lenses - Prediction:Below is a description for inspection and adjustment of an
AF lens focusing system:
In both cases, AF-S or C the camera use the information from the CPU about 'prediction' of how to drive the AF motor of the particular lens in use to reach the right focus plane at the right time, to achieve a sharp image.
Here is the Nikon Service manual for 24-70mm AFS 2.8:
http://allphotolenses.com/public/files/pdfs/4b4fb97547c5d54819491c07c715f2c2.pdfOn page 70 and forward you see how to inspect and adjust a lens CPU AF values.
On page 76-79 it is described how the 'predictive' part of the lens focusing, overrun/underun is measured and adjusted.
This show that the camera is also predicting or taking an educated guess, from the values given by the lens CPU how to run the AF engine inside the lens so it stops focusing at the right point in time.
The camera is not just picking up the movement and position of the object with the AF sensors in AF-C or AF-S mode and just fire the shutter, it would miss the focus point.
PS no Bjørn cant program this into your CPU for you Manual Focus lenses,,,