Author Topic: how to work with helicoids!  (Read 1963 times)

richardHaw

  • Cute Panda from the East...
  • NG Supporter
  • **
  • Posts: 3145
  • Your lens loverboy
    • Classic Nikkor Maintenance and DIY
how to work with helicoids!
« on: April 10, 2016, 07:17:33 »
https://richardhaw.com/2016/04/10/repair-helicoids/

if anybody has anything to add, i can add it into the blog  :o :o :o

David H. Hartman

  • NG Member
  • *
  • Posts: 2783
  • I Doctor Photographs... :)
Re: how to work with helicoids!
« Reply #1 on: July 22, 2016, 23:59:51 »
Thank you for this guide. I have a 50/1.4 AIS that's been quick cleaned twice by a friend twice and is in need of a complete strip and relube. I think someone baked the lens in the trunk of a car and destroyed the original grease.

Dave
Beatniks are out to make it rich
Oh no, must be the season of the witch!

richardHaw

  • Cute Panda from the East...
  • NG Supporter
  • **
  • Posts: 3145
  • Your lens loverboy
    • Classic Nikkor Maintenance and DIY
Re: how to work with helicoids!
« Reply #2 on: July 24, 2016, 15:21:56 »
Thank you for this guide. I have a 50/1.4 AIS that's been quick cleaned twice by a friend twice and is in need of a complete strip and relube. I think someone baked the lens in the trunk of a car and destroyed the original grease.

Dave

you are most welcome, Dave!

You may want to check the type of grease used. it has a tendency to gunk-up so it might not be suited for lens helicoids.  :o :o :o
some shops here cut corners and use grease that is meant for other stuff that is unsuitable for lenses.

some grease types that I know that works for lenses are red bike grease and the one used for fishing reels. ::) some of the shops use these but the best one is what Nikon itself uses - NPC grease (nippon petrochem).