Author Topic: Zeiss : About the reduction of reflections for camera lenses  (Read 3147 times)

JAP

  • NG Member
  • *
  • Posts: 37
  • You ARE F3
Juha

John Geerts

  • NG Supporter
  • **
  • Posts: 9357
  • Photojournalist in Tilburg, Netherlands
    • Tilburgers
Re: Zeiss : About the reduction of re ections for camera lenses
« Reply #1 on: April 20, 2016, 23:13:27 »
Interesting, heavy reading, so I started with scrolling  ;)

First thing I noticed are the many photo's, which is nice. But the flare examples are a bit exaggerated to my idea.  They are all very appropriate for the flare-topic...

pluton

  • NG Supporter
  • **
  • Posts: 2687
  • You ARE NikonGear
Re: Zeiss : About the reduction of re ections for camera lenses
« Reply #2 on: April 21, 2016, 20:46:20 »
I like the totally uncoated lenses they built for demo purposes...very cool.
Keith B., Santa Monica, CA, USA

Harald

  • NG Member
  • *
  • Posts: 287
    • Flickr
Re: Zeiss : About the reduction of reflections for camera lenses
« Reply #3 on: April 21, 2016, 21:50:05 »
Where are my flares?!  :o
Some pictures on FLICKR

Bjørn Rørslett

  • Fierce Bear of the North
  • Administrator
  • ***
  • Posts: 8252
  • Oslo, Norway
Re: Zeiss : About the reduction of reflections for camera lenses
« Reply #4 on: April 21, 2016, 22:15:09 »
I recall my initial testing of the 24-70/2.8 back in late 2006, prior to the launch of the D3, when I received an experimental sample. Optics were the final design, but there was no final coating on any of the surfaces. Nikon wanted me to check the usefulness of the lens as such, including AF speed, which was phenomenal compared to the existing lenses at that time. However, it flared like crazy; no wonder considering the lack of multicoating.

simsurace

  • NG Member
  • *
  • Posts: 835
Re: Zeiss : About the reduction of reflections for camera lenses
« Reply #5 on: April 21, 2016, 23:51:51 »
I recall my initial testing of the 24-70/2.8 back in late 2006, prior to the launch of the D3, when I received an experimental sample. Optics were the final design, but there was no final coating on any of the surfaces. Nikon wanted me to check the usefulness of the lens as such, including AF speed, which was phenomenal compared to the existing lenses at that time. However, it flared like crazy; no wonder considering the lack of multicoating.
It's interesting that the AF system didn't care much about the flares.
Simone Carlo Surace
suracephoto.com

Bjørn Rørslett

  • Fierce Bear of the North
  • Administrator
  • ***
  • Posts: 8252
  • Oslo, Norway
Re: Zeiss : About the reduction of reflections for camera lenses
« Reply #6 on: April 22, 2016, 00:10:08 »
I used only the centre AF point, due to the potential flare issue.

A pity I couldn't keep this early pilot sample, as it possibly might be useful for UV due to the lack of multicoating. I also had to delete all test images according to the NDA involved.

Bernard Delley

  • NG Member
  • *
  • Posts: 135
  • You ARE NikonGear
Re: Zeiss : About the reduction of reflections for camera lenses
« Reply #7 on: April 26, 2016, 14:28:22 »
Quite heavy reading, but lot of information...

http://lenspire.zeiss.com/en/wp-content/uploads/sites/2/2016/04/en_About-the-reduction-of-reflections-of-camera-lenses.pdf


Very nice review article. Thanks for the link!   
Having been a close colleague of a top notch multi-coating theorist, I was curious about what would be said about multi-coating beyond three layer and the recent nano-coating. Nice to see that both were briefly discussed.