NikonGear'23

Gear Talk => What the Nerds Do => Topic started by: schwett on February 09, 2018, 07:07:30

Title: 10 pin shutter interface details
Post by: schwett on February 09, 2018, 07:07:30

hi all

does anyone know the electronic details of the 10 pin interface? not the pinouts (easy enough to find) but the signaling protocol? i'm trying to trigger the camera from the PWM output of a flight controller / radio receiver.

thanks in advance for any input!

Title: Re: 10 pin shutter interface details
Post by: Erik Lund on February 09, 2018, 08:32:47

Here is the best I have found, not sure what else you need,,,


http://gadgetdownloadru.blogspot.dk/2016/08/remote-control-camera-switching-circuit.html

Title: Re: 10 pin shutter interface details
Post by: schwett on February 09, 2018, 08:36:42

Thank you, a good start!

Title: Re: 10 pin shutter interface details
Post by: Seapy on February 09, 2018, 09:20:22

I would hook the camera and a ten pin device up to an oscilloscope and run through some procedures.  Have done this to identify signals with unknown printer interfaces in the past.

Title: Re: 10 pin shutter interface details
Post by: Numsiripha on February 22, 2018, 10:47:37

By reading this content. It made me realize that this is a very useful thing. Very good knowledge.

Title: Re: 10 pin shutter interface details
Post by: armando_m on February 22, 2018, 16:07:31

From you circuit trigger both the meter/autofocus on and shutter píns