NikonGear'23

Gear Talk => Camera Talk => Topic started by: BW on December 07, 2016, 22:39:21

Title: Banding/Stripes on the raw file.
Post by: BW on December 07, 2016, 22:39:21
I shot this picture with a flash tonight. Shutter speed was 1/8000th of a second and the lens was the Nikkor O 35 mm. It was shot at f2,8. The camera was the D4s. It was a Strobies flash with Godox trigger. I have never noticed anything like this before, and my best guess is that the camera was in live view mode while I took the pictures. Could this be the case? Please enlighten me if anyone else has any plausible ideas.
Title: Re: Banding/Stripes on the raw file.
Post by: Bjørn Rørslett on December 07, 2016, 22:42:18
More likely the high-speed flash functionality showing its inadequacy.
Title: Re: Banding/Stripes on the raw file.
Post by: BW on December 07, 2016, 22:59:07
Have used it many times and never noticed it before. I have to test it again tomorrow, without the live view engaged. I bonced the flash off the roof and there was another light source involved, a led light. It wouldnt be strong enough to contribute to the exposure, but it might account for the flickering??
Title: Re: Banding/Stripes on the raw file.
Post by: Bjørn Rørslett on December 07, 2016, 23:00:40
Only elimination experiments can tell for sure.
Title: Re: Banding/Stripes on the raw file.
Post by: charlie on December 07, 2016, 23:02:46
Freezing motion in this manor is typically done by the flash duration of the strobe you're using, not the camera shutter speed, I assume this is why you had it set to 1/8000s? Make sure no ambient light is making its way into the exposure and try this again at 1/250th to see if there is any difference in motion blur.

I would expect the flash you are using the have the shortest duration at the lowest power setting. 
Title: Re: Banding/Stripes on the raw file.
Post by: BW on December 07, 2016, 23:22:23
I will check it again tomorrow and try the elimination method. I was hoping to avoid reading the manual, but it seem I have swallow the bitter pill Charlie ;)
Title: Re: Banding/Stripes on the raw file.
Post by: Akira on December 07, 2016, 23:59:34
If the shutter speed was 1/8000, the flash should have been in FP mode.  In such a mode, a flash is usually lighting in the fast pulsating manner and not continuously.  In addition, which the slit of the shutter set at 1/8000 is very narrow.  So, the lighting (exposure) may not necessarily be consistent according to the moment the slit passed each area.
Title: Re: Banding/Stripes on the raw file.
Post by: BW on December 12, 2016, 19:33:07
I think your explanation might account for the observed effect, Akira.