NikonGear'23
Gear Talk => Camera Talk => Topic started by: Tristin on June 24, 2016, 05:24:01
-
Dropped from 1m to concrete, caused a crack near the menu button down along the seam to the corner below. Camera worked fine for a couple hours of shooting, then menu button got stuck in the depressed position. Now menu navigation is impossible. Any opinions or heads up on ballpark repair figures is appreciated.
(http://i.imgur.com/mHf3xzU.jpg)
-
Sorry to read this. I hope you're insured.
Dave
-
If only the external shell is cracked, and the internal chassis is still good, it'll be repairable. My guess: Several hundred ($400+) US dollars at Nikon. I recommend walking it in to the Nikon service in L.A. if possible. One good thing is that a substantial amount of the internal chassis of the D750 body is polycarbonate, which can flex and recover when whacked. My D800's, in comparison, have an all[or mostly all]-metal chassis, which has been shown to be somewhat fragile. I miss my old D3 for it's heavy-duty battle-wagon body. Now is a good time to think about having a spare body.
-
Ouch! Sorry for your disappointment. The lower left part of the rear panel is also cracked.
The conventional models had the rear panels with the LCD screens glued to them and they had to be replaced with the LCD altogether, which would result in an expensive repair. On the other hand, the rear panel of D750 is simply a piece of magnesium. So, the replacement would be much simpler and cheaper, I hope.
-
Pluton, my income is not sufficient to have multiple bodies :-/
Akira, the LCD damage is actually a layer of protective glass that is cracked and was done previously.
-
Akira, the LCD damage is actually a layer of protective glass that is cracked and was done previously.
Sorry to hear that, again. Didn't you use a camera strap?
-
Yeah, it was a stupid accident.
-
Provided the bayonet/mirror/sensor are still aligned and otherwise ok this is easily fixable. To replace the rear panel is no big operation. If you can get the part you ought to be able to fix this yourself. Look for a D750 with water damage or order the part from Nikon. The other, safer solution is to let Nikon service it.
-
Sorry to hear that Tristin. If the damage doesnt affect any alignement, af performance or otherwise shooting with the camera, I would use some high viskose glue to fill the crack and move on. Araldite would do the trick. I once glued together a rifle, that I happened to be under the wheels of my car :o It had a polycarbonate stock and it still serves me well. If you are on a tight budget and not able to get it fixed, I am sure many of us could chip in to help a NG fellow. After all you entertain us with some pretty good images for free :)
-
Thanks all, I am hoping I can get the menu button unstuck so I can use some superglue and keep chuggin along. Anyone have tips on dealing with the stuck button?
Børge, thanks for the care. Been in a rough patch lately, but hope to be sharing images on a regular basis again soon. :-)
-
Anyone have tips on dealing with the stuck button?
How about using a piece of strong tape like duct tape to stick onto the stuck menu button and pull up?
-
Tristin, sorry to hear about your misfortune. The first thing I would try is using one of my Watch Maker tiny screw drivers to see if I could unstick the button. I have no idea what the button looks like from the inside of the rear cover but it may just be jammed at an angle. I am not brave enough to start taking the camera apart. There is also a screw just below the WIFI symbol. I do not know if taking that out would give you enough play to open just that corner to get a small screwdriver in( lever) in.
I would just send it to my friendly service center if I could not get the button to function, but I have multiple cameras to use.
Best of luck
Edit: Just read Akira's reply. Worth a try. I did check my D750 and there is enough space to get my smallest screw driver down the side of the button.
-
Yeah, it was a stupid accident.
Most are it would seem. I rolled a Rollei 80/2.8 Xenotar off my lap while installing a neck strap. I don't think one can do much worse. The damage was cosmetic and limited to the waist level viewfinder. I was very lucky.
I hope the camera is repairable at not too painful a price. I'd let Nikon give you an estimate.
Best,
Dave
-
Ouch...
I dropped mine when changing the strap and it is not a feeling I would like for anyone. I was luckier than you.
I will second a nikon official estimate as a good starting point. Just have mine send to replace top part -flash commander not working properly, now perfect and af recall also fixed- they were fast.
I wish for a speedy, easy, happy and cheap solution.
-
Tristan - commiserations.
I am sure that all on this site will join with Paco in wishing you a "speedy, easy, happy and cheap solution" for your D750.
~~~~~~~~~~~~~~~~~~~~~~~
The closest that I have come to dropping a camera was when I dropped my near new OMD E-M1 on my foot - discovered swiftly that the camera was indeed made of metal. It was OK, but the foot hurt for ages. Also sufferred one fall and wrote off a Nikon 28-300mm lens, but the insurance covered most of the replacement. With the best care in the world these calamities can still happen.
Ouch...
...................................................................................................
I wish for a speedy, easy, happy and cheap solution.
-
Sorry to hear that, again. Didn't you use a camera strap?
The one time I dropped a camera to the ground, I was juggling multiple photographic items, the camera strap was off my neck, and I made a mental error causing the camera to lose all support. That was a stupid error indeed, but eventually we all have mental lapses of one sort or another.
My favorite was the time I put my fairly new dress shoes on top of my vehicle while loading it up for a long trip to my parents' house. Once everything was loaded I drove off, and noted a pedestrian strangely staring at my vehicle while he crossed the street. Nothing else was amiss so I thought nothing of the matter. Then, soon after I got onto the expressway, up to full speed, and into the fast lane, I heard a little sound from the rear of the vehicle. I looked in the side mirror just in time to see my shoes bouncing along the pavement behind me.
There was no shoulder to stop on and traffic was murderous so I had no choice but to accept the loss. Belatedly I realized why the pedestrian had been staring so intently - surely it had been a strange sight to see two shoes riding on my roof as I drove along! Fortunately, that was over 30 years ago and I've not repeated that error since... only other errors instead!
-
sorry to hear this Tristin.
If Mongo understands you correctly, it is working OK but for the "menu" button which is now permanently depressed and as such cannot be used (and may be interfering with its use generally). If that is the situation, Mongo would seriously try every simple physical means to free the "menu" button and getting it working for now. It seems reasonably plausible that the crack has slightly distorted the casing opening around the menu button and that it has now tightened up against the button and stopping it from coming up again. You have little to lose by using something very small and sharp i.e a very fine needle to try and lift the menu button up again by levering it up around any of its edges you can get a grip on with using the needle. Even if you manage this and it starts working again, you will have to do something to modify the cracked opening around the button so that it no longer "grips" the button when you next use it. If all of that works, Mongo would then just use a very small nozzled applicator of super glue to run along the cracks (but do not use so much that it will seep inside the case itself - just the outside) AND do NOT use it near any buttons - just stop short of any by 3 or 4 millimetres lest you glue the buttons to the case and stop them operating altogether.
Good luck
If it cost $300-$400 Mongo would get it repaired properly - it is a good camera and about $2500 to replace otherwise.
PS - Mongo may look old fashioned and nurdy but he still uses a strap around his neck on all his equipment so it does not fall to the ground. Just a suggestion.
-
here in japan, it would probably cost you $300 or so to have that replaced. that was what i paid for a friend's beater D800's replacement top and rubber parts :o :o :o
-
What an unfortunate collapse, hope you can fix it.