Author Topic: PC 19mm f/4 E ED  (Read 44020 times)

CardBoardBoxProcessor

  • NG Member
  • *
  • Posts: 50
  • You ARE NikonGear
Re: PC 19mm f/4 E ED
« Reply #270 on: October 08, 2018, 22:10:07 »
Eh, just bit the bullet and bought one.  ::)

Birna Rørslett

  • Global Moderator
  • **
  • Posts: 595
  • A lesser fierce bear of the North
Re: PC 19mm f/4 E ED
« Reply #271 on: October 08, 2018, 22:10:58 »
That is the usual end result ... I did the same :D

Erik Lund

  • Global Moderator
  • **
  • Posts: 4727
  • Copenhagen
    • ErikLund.com
Re: PC 19mm f/4 E ED
« Reply #272 on: October 08, 2018, 22:40:24 »
Diameter of collar should be 74.1mm  ;)
Erik Lund

CardBoardBoxProcessor

  • NG Member
  • *
  • Posts: 50
  • You ARE NikonGear
Re: PC 19mm f/4 E ED
« Reply #273 on: October 08, 2018, 23:09:09 »
Thanks. I found cheap hood on Adorama. Will feet Haida 150 adapter soon.

Was planning to use 3d printer to adapt 15mm f/4 to Z7 I was going to buy. But I'll wait for the next generation.

Any idea the non paralax point form the rear mount?
and does anyone know how to tell a US serial number? 20XXXX is what I got.

Erik Lund

  • Global Moderator
  • **
  • Posts: 4727
  • Copenhagen
    • ErikLund.com
Re: PC 19mm f/4 E ED
« Reply #274 on: October 15, 2018, 13:36:23 »
15/4
Was planning to use 3d printer to adapt 15mm f/4 to Z7 I was going to buy. But I'll wait for the next generation.
Not sure what you are talking about here,,, 15mm should be 19mm right?


The 19mm PC-E works quite well on the Z7 no adapter needed besides the FTZ so you would not need an seperate clamp like the one I have, just put a short plate on the FTZ with a distance piece to clear the movements ;)


Focus peaking  works but is not better than looking at the rear screen of the D850 in Live view, a Zacuto finder on the D850 is better for me than Z7 focus peaking.


Nodal point is very close to where my collar is located, it moves as you change Focus, Tilt and Shift i believe ;)
Erik Lund

CardBoardBoxProcessor

  • NG Member
  • *
  • Posts: 50
  • You ARE NikonGear
Re: PC 19mm f/4 E ED
« Reply #275 on: October 16, 2018, 14:55:50 »
Could you post another link to your hood pattern? The drop box link no longer works and the flickr I cannot just download the image.

Erik Lund

  • Global Moderator
  • **
  • Posts: 4727
  • Copenhagen
    • ErikLund.com
Re: PC 19mm f/4 E ED
« Reply #276 on: October 24, 2018, 10:40:44 »
Here is a link to the template for cutting a HB-19 lens hood to fit PC Nikkor 19mm ED 4E without vignetting, as far as I have tested ;)

https://www.dropbox.com/s/ne4b2okiw2intrk/HB19%20template%20for%20Nikkor%2019mm%20.pdf?dl=0

It is a PDF file from a scan, print 100% (Not fit to A4)

Or download this JPG from Flickr also 100%

HB19-template-for-Nikkor-19mm- by Erik Gunst Lund, on Flickr


Should work now ;)
Erik Lund

CardBoardBoxProcessor

  • NG Member
  • *
  • Posts: 50
  • You ARE NikonGear
Re: PC 19mm f/4 E ED
« Reply #277 on: November 05, 2018, 21:25:32 »
This lens is what I've been looking for my whole life....

Though, the 28mm f/4 PC T/C Eric made gives it a close runner up. It is small and sharp AF. so Ill probably keep it too.

Will be selling my 28mm f/3.5 and 25mm f/2.8 PC lenses.

Erik Lund

  • Global Moderator
  • **
  • Posts: 4727
  • Copenhagen
    • ErikLund.com
Re: PC 19mm f/4 E ED
« Reply #278 on: November 07, 2018, 10:03:57 »
Congratulations ;)  It looks like you got the lens clamp on ;)
It's a remarkable lens indeed!
Erik Lund